- Fast drying
- For use on PVC pipes and fittings up to 6”SCH 40 DWV and 2”SCH 80
- Ideal for pools, water tanks, and other humid places
-
Blue medium viscosity cement ideal to bond PVC pipes in wet conditions. -
Excellent adhesion flexible cement, specially formulated to permanently bond Vinyl coated and Vinyl laminated fabrics to themselves or others materials. Ideal for patching and sealing. Suitable for signs, mats, truck and pool covers, sporting goods, tents, etc. Ideal for patching and sealing- Excellent for the adhesion of Vinyl coated and Vinyl laminated fabrics
- Waterproof and Resistant to temperature
-
Medium viscosity orange cement designed to bond CPVC pipes and fittings.- Resists high temperatures
- Fast set
- Professional use
-
Transparent adhesive with a regular consistency designed for bonding PVC pipes used in potable water, sewer, drain, waste and vent systems.- Waterproof
- Strong bond
- For use on PVC pipes and fittings up to 4”SCH 40 DWV and 2”SCH 80. Fast Set
- Fast set
-
Solvent based purple cleaner-primer designed for use on PVC and CPVC pipes, conduits and fittings used in potable water, sewer and drain, waste and vent systems.- Removes dirt and grease
- Softens pipes preparing them for the subsequent application of cement
- Permanently stain purple pipes leaving evidence of the application
-
Transparent regular viscosity adhesive designed for bonding PVC pipes used in potable water, sewer, drain, waste and vent systems.- Can’t be used in ducts for hot water or steam.
-
Chloroprene solvent based adhesive. Manual application: Brush or roller. Strong initial bonding. Drying in 15-20 minutes. High solids content.
- Strong initial bonding.
- High heat resistance.
- High solids content.
- Drying in 15-20 minutes.
-
The hottest blue PVC cement available which is specially formulated for residential and commercial irrigation to minimize cure times. For use on all schedule and classes of PVC pipe and fittings up to 6’’ with interference fit.- Ideal for pools, water tanks, and other humid places
- Very fast setting formula for wet conditions and / or immediate pressurization
- No primer needed
- Recommended application temperature 40°F to 110°F / 4°C to 43°C
- Fast drying
-
Medium density orange cement for use in CPVC pipe and fittings up to 6 "in diameter. Packages available: 4, 8, 16 and 32 fl oz with applicator and 1 gallon.- For C.T.S. tubing (the size of a copper tube) and C-80, potable pipes
- It can be applied at temperatures of 4.5° C to 38° C
- Orange color
-
Oatey® Heavy Duty Gray PVC Cement is formulated for use on all schedules and classes PVC pipe and fitting up to 12" diameter with interference fit, up to 18" for non-pressure Recommended for potable water, pressure pipe, conduit and DWV- Thick formula fills gaps in large diameter pipe and loose fitting joints.
- Recommended application temperature 40°F to 110°F / 4°C to 43°C
-
Oatey® Regular Clear PVC Cement is formulated for use on all schedules and classes of PVC pipe and fittings up to 4" for Sch. 40 and up to 2" for Sch. 80.- Recommended for potable water, pressure pipe, conduit and DWV
- Meets ASTM D2564
- Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements
- Recommended application temperature 40°F to 110°F / 4°C to 43°C
-
Oatey® Heavy Duty Gray PVC Cement is formulated for use on all schedules and classes PVC pipe and fitting up to 12" diameter with interference fit, up to 18" for non-pressure- Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements
- Meets ASTM D2564
- Recommended application temperature 40°F to 110°F / 4°C to 43°C
- Recommended for potable water, pressure pipe, conduit and DWV
- Thick formula fills gaps in large diameter pipe and loose fitting joints
-
An advanced brush grade formula based on high crystallization polymers which offers permanent bonding and ultra fast setting, specially design for bonding a wide variety of substrates used in furniture manufacturing, mattresses and upholsteries.
- Bonds wood, decorative laminates, plywood, quilt foam, leather, rubber and similar surfaces
- Moderate heat resistance.
- Dry ultra-fast (10-20 minutes).
- Open time 40 minutes
-
Water based textured blue adhesive agent to bond old and new concrete to old concrete. It can be applied by brush or roller on the surface of masonry, plaster, concrete, brick, coral, wood, plywood, ceramic and many other surfaces with structural integrity.- Exterior / Interior
- Maximum strength Adhesion
- Water clean up
- 45% Solids
-
Line of Aqueous based adhesives.Code Features and Applications 6305 Contact glue made of natural rubber. Use for the confection of the cover and the shoe in general. 6310 Glue made of synthetic latex. Used for pasting labels on corrugated boxes. 6315 Contact glue made of natural rubber with low content of ammonia. Use for pasting fabrics, leather, and other materials. -
An advanced brush grade chloroprene based formula specially designed for bonding a wide variety of substrates used in the shoe industry.Code Features and Applications 9105 Fast drying glue, good initial tack and medium open time. Suitable for gluing uppers to outsoles for later stitching. 9110 Glue (1K) with medium drying, strong grip and high heat resistance. Its good flexibility (medium crystallization) allows gluing of toe caps to leather. Used in gluing leather flooring, EVA, Neolite®. 9115 Glue (1K) with normal drying, good grip and high heat resistance. Suitable for application to the heel. Used in leather bonding, EVA, Neolite®. 9120 Glue (1K) with quick drying, strong grip. It has a high crystallization and is suitable for fixing floors to cut in sewing operations. 9125 Fast drying glue, strong grip and high heat resistance. It has a medium crystallization and is suitable for greasy leathers. 9130 Glue (1K) with medium drying, strong grip and high solids content. Its medium open time allows it to be used to manually join leather, EVA, Neolite®, wood, fabrics and other materials used in shoemaking. 9135 Quick drying glue, good heat resistance. It has a medium crystallization and a medium open time. Find its use in templates (internal part). 9140 Glue with permanent bonding and good heat resistance. It has a high crystallization and finds its use in the assembly of pieces of footwear to be later sewn. 9145 Fast drying glue with permanent bonding. Specially designed for gluing insoles and parts that will later be sewn. 9150 Glue with super-fast drying, high tack, permanent bonding and high resistance. It is especially suitable for leather and synthetic materials. 9151 Glue with fast drying, long open time and heat resistance. It is especially suitable for pieces that will later be sewn. 9152 Fast drying glue, long open time and good heat resistance. To be used in gluing substrates in the manufacture of footwear, especially in the manufacture of pieces that will later be sewn. 9155 Fast drying glue, good resistance to heat and without toluene in its “toluene free” formulation. It presents a medium crystallization and a medium open time, which allows it to be used in templates (internal part).