- Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements
- Meets ASTM D2564
- Recommended application temperature 40°F to 110°F / 4°C to 43°C
- Recommended for potable water, pressure pipe, conduit and DWV
- Thick formula fills gaps in large diameter pipe and loose fitting joints
-
Oatey® Heavy Duty Gray PVC Cement is formulated for use on all schedules and classes PVC pipe and fitting up to 12" diameter with interference fit, up to 18" for non-pressure -
Non-toxic adhesive, fast and transparent, washable, based on aliphatic resins. Ideal to bond cork, cardboard, paper, fabric and other porous materials.- Permanent adhesion
- High heat resistance
-
High strength and fast setting aliphatic resin glue ideal for furniture, cabinetry and finish trim applications. Specifically formulated to bond hard and soft wood, as well as most porous materials. Available in yellow and white colors- Good adhesion
- Sands easily
- Paintable
- Easy clean up
- Solvent-Free
- Applicator cap in 8, 16 and 32 oz and 5 gal
-
Silbond acrylic filler is a white filler specially formulated for seal and repair cracks, holes and dents on concrete, plaster and wood walls and roofs.- Fast drying
- Excellent bond strength
- Easy to sand
- Paintable
-
Concrete liquid pink adhesive specially formulated to promote a permanent strong bonding between old and new concrete, plaster, brick, stone, wood, plywood, ceramic and many other surfaces with structural integrity. It can be also incorporated direct to the concrete mix, using one gallon of water instead of one gallon of product to improve rheology and increase bonding strength.- Excellent bond strength
- Exterior / Interior
- Water clean up
- 45% Solids
-
Bonds quilt foam, leather, wood, decorative laminates, plastic laminates, Plywood, linoleum, etc.
An advanced brush grade chloroprene based formula, specially design for bonding a wide variety of upholstery materials used in furniture manufacturing.- High adhesion strength.
- Heat-resistant.
- Multi-Purpose.
- Multi-Purpose.
-
Black asphalt based compound specially designed to repair cracks and holes on concrete on roofs. Seals damaged parts and produce a waterproof film. Seals damaged parts and produce a waterproof film. It is recommended as a primer for very porous and irregular surfaces, adapting it to waterproofing.- Seals and repairs holes and cracks
- Fully waterproof
- Paintable
- Exterior use
- Yield: Approx. 12 square feet (1 m 2) / gallon
-
An advanced brush grade formula based on high crystallization polymers which offers permanent bonding and ultra fast setting, specially design for bonding a wide variety of substrates used in furniture manufacturing, mattresses and upholsteries.
- Bonds wood, decorative laminates, plywood, quilt foam, leather, rubber and similar surfaces
- Moderate heat resistance.
- Dry ultra-fast (10-20 minutes).
- Open time 40 minutes
-
Water based textured blue adhesive agent to bond old and new concrete to old concrete. It can be applied by brush or roller on the surface of masonry, plaster, concrete, brick, coral, wood, plywood, ceramic and many other surfaces with structural integrity.- Exterior / Interior
- Maximum strength Adhesion
- Water clean up
- 45% Solids
-
Silibond 101 White Glue Versatile product for a wide range of applications. Specially designed for paper, cork, cloth, wood and other porous materials. Ideal for photo mounting.- Permanent adhesion
- High heat resistance
- Dries quickly
-
Versatile product for a wide range of applications. Designed especially for gluing paper, cork, screen, wood and other porous materials. It is ideal for photo frame. It is ideal for photo frame. Dries quickly Easy Use. It contains no solvent. Non flammable.- Permanent adhesion
- High heat resistance
- Dries quickly
-
Multifunction medium viscosity long open time EVA Hotmelt. Translucent white color. Multifunction.- Good fusion capacity to facilitate the application.
- Good penetration to substrate.
- Versatility to bond a variety of substrates.
- Open time for manually applications.
- Fast gluing.
-
Super-Bond is designed to be used on small offset presses as a low cost alternative to the more expensive rubber based inks. Tinta offset sustituto de Base – Goma con compatibilidad a una gran variedad de sustratos. Posee un excelente control del agua. It has an excellent dampening system. Super-bond will be kept “open” in the press all night; however will dry instantly with the help of any drier or catalyzer. Super-Bond for non porous substrates is a fast drying high quality oil based ink use in the printing of non porous materials such as PVC, cartonite, glossy substrates, etc. Available in all Pantone colors. Packaging available:- 0.5 Kg (1.1 Lb)
- 1 Kg (2.2 Lb)
- 4 Kg (8.8 Lb)
-
Superior is an excellent oil based press-ready litho ink. Can stay open on press overnight and will not skin in the can for days. Use Superiorwherever there is a commercial printing on paper substrates. It works well on a wide variety of stocks including quality offset stocks and coated stocks. It has a great deal of compatibility with many graphic arts chemicals. Ink conditioners and gel reducers will all work well with Superior Inks. It contains PE and PTFE waxes which means that with proper the precautions it can be used with or without overprinting. Superior Business Forms is a soy oil based ink used in continuous forms printing. Low VOC content. Colors are clean and bright, delivering quality results in such critical areas as the printing of delicate process shades and fleshtones. Excellent rub resistant only minutes after impression. Superior for non porous substrates is a fast drying high quality oil based ink use in the printing of non porous materials such as PVC, cartonite, glossy substrates, etc. Available in all Pantone colors. Packaging available: 0.5 Kg (1.1 Lb) 1 Kg (2.2 Lb) 4 Kg (8.8 Lb) -
Line of Aqueous based adhesives.Code Features and Applications 6305 Contact glue made of natural rubber. Use for the confection of the cover and the shoe in general. 6310 Glue made of synthetic latex. Used for pasting labels on corrugated boxes. 6315 Contact glue made of natural rubber with low content of ammonia. Use for pasting fabrics, leather, and other materials. -
An advanced brush grade chloroprene based formula specially designed for bonding a wide variety of substrates used in the shoe industry.Code Features and Applications 9105 Fast drying glue, good initial tack and medium open time. Suitable for gluing uppers to outsoles for later stitching. 9110 Glue (1K) with medium drying, strong grip and high heat resistance. Its good flexibility (medium crystallization) allows gluing of toe caps to leather. Used in gluing leather flooring, EVA, Neolite®. 9115 Glue (1K) with normal drying, good grip and high heat resistance. Suitable for application to the heel. Used in leather bonding, EVA, Neolite®. 9120 Glue (1K) with quick drying, strong grip. It has a high crystallization and is suitable for fixing floors to cut in sewing operations. 9125 Fast drying glue, strong grip and high heat resistance. It has a medium crystallization and is suitable for greasy leathers. 9130 Glue (1K) with medium drying, strong grip and high solids content. Its medium open time allows it to be used to manually join leather, EVA, Neolite®, wood, fabrics and other materials used in shoemaking. 9135 Quick drying glue, good heat resistance. It has a medium crystallization and a medium open time. Find its use in templates (internal part). 9140 Glue with permanent bonding and good heat resistance. It has a high crystallization and finds its use in the assembly of pieces of footwear to be later sewn. 9145 Fast drying glue with permanent bonding. Specially designed for gluing insoles and parts that will later be sewn. 9150 Glue with super-fast drying, high tack, permanent bonding and high resistance. It is especially suitable for leather and synthetic materials. 9151 Glue with fast drying, long open time and heat resistance. It is especially suitable for pieces that will later be sewn. 9152 Fast drying glue, long open time and good heat resistance. To be used in gluing substrates in the manufacture of footwear, especially in the manufacture of pieces that will later be sewn. 9155 Fast drying glue, good resistance to heat and without toluene in its “toluene free” formulation. It presents a medium crystallization and a medium open time, which allows it to be used in templates (internal part). -
Line of solvent based Natural Rubber Adhesives.Code Features and Applications 3105 Glue with fast-dry, high adhesive, and good heat resistant. Adequate for pieces of hem. 3110 Glue with fast-dry and low-cost. Presents excellent properties for hem pieces. 3115 Glue with medium dry. Presents excellent properties to paste insoles. -
Solvent-based polyurethane glue, with medium-long hot open time and high initial and final bond strength. It is also supplied in black (5112) and white (5113). Packaging available: 5 and 55 gal Line of solvent based Polyurethane adhesives.Code Features and Applications 5106 Low viscosity glue with UV indicator. Used to join synthetic materials (PVC, PU, vinyl laminates etc.). 5110* Glue with medium-high hot open time and good starting and ending strength. Suitable use for bonding synthetic materials such as PVC, PU, laminates, etc. 5111 Glue with medium-long hot open time and high initial and final bond strength. It contains in its formulation a UV additive for its visibility under ultraviolet light Suitable for bonding white synthetic materials such as PVC, PU, Vinyl laminates. 5112 Glue with medium-long hot open time and high initial and final bond strength. Suitable for bonding white synthetic materials such as PVC, PU, Vinyl laminates. 5113 Glue with medium-long hot open time and high initial and final bond strength. Suitable for bonding white synthetic materials such as PVC, PU, Vinyl laminates. 5114 Glue with medium-high hot open time, good initial and final strength and without Toluene in its “toluene free” formulation. Suitable for bonding synthetic materials such as PVC, PU, laminates, etc. 5116 Glue with short hot open time, excellent initial and final strength and high heat resistance. Contains UV indicator. Suitable for gluing all kinds of cuts to PU floors; EVA, SBR, TPR pretreated. 5118 Glue with medium hot open time, excellent initial and final strength and high heat resistance. Contains UV indicator. Suitable for gluing all kinds of cuts to PU floors; EVA, SBR, TPR pretreated. 5120 Glue with short hot open time, excellent initial and final strength and high heat resistance. Contains UV indicator. Suitable for gluing all kinds of cuts to PU floors; EVA, SBR, TPR pretreated. 5125 Glue with short hot open time, excellent initial and final strength and high heat resistance. Contains UV indicator. Suitable for gluing all kinds of cuts to PU floors; EVA, SBR, TPR pretreated. 5126 Glue (1 and 2K) with medium hot open time. Ideal for processes that require high resistance to bonding, it contains a UV indicator. Suitable for gluing PU, PVC, pretreated synthetic rubber. 5130 Glue with long hot open time, low activation temperature and high hot tack. Suitable for gluing PVC, PU floors; SBR, TPR (pretreated) where high final strength is needed. 5131 Glue with open time with long heat, low temperature of reactivation, and high “hot-tack”, contains a UV indicator. Adequate for pasting any type of floor of PU; PVC and EVA, SBR, TPR pretreated. 5140 Glue with long open time and a high initial force (after it dries), this allows that the glue can be use without activating it. Glue for assembling and reparations. -
Line of auxiliary products for the gluing process of the shoe manufacturingCode Features and Applications 4200 Adequate solvent mixture to dilute the viscosity of the glues. SUPREMO URETHANE CEMENT. 4205 Suitable solvent mixture for the dilution of the glues CEMENTO SUPREMO CHLOROPRENE. 4210 Adequate solvent mixture to dilute and give stickiness to the buttress of the shoes. -
Premium product with advanced chloroprene based formula; specially designed for manually bond (brush or roller) a variety of substrates used in furniture manufacturing.
- Ideal for bonding wood, decorative laminates, quilt foam, plywood, leather, rubber
- Permanent adhesion.
- High heat resistance.
- High solids content.
- Dry ultra-fast (10-20 minutes).
- Open time 40 minutes.
- Permanent adhesion.
- High water resistance.
- High solids content.
-
Advanced high solids chloroprene based spray grade formula designed for bonding a wide variety of substrates used in the furniture and construction industries. Available in clear and red color.
-
High strength and fast setting aliphatic resin glue ideal for furniture, cabinetry and finish trim applications. Specifically formulated to bond dark hard and soft woods, as well as most porous materials.- Excellent bond strength
- Dries rapidly- Short clamp time
- Fully waterproof
- Sands easily
- Paintable
- Easy clean up
- Solvent-Free
- Easy applicator cap 32 oz
-
Versatile, high strength, moisture curing professional glue. Specifically formulated to bond wood, ceramics, metal, plastics, stone and most porous and non porous materials.- Excellent bond strength
- Bonds a wide variety of materials
- Long open time
- Exterior and interior use
- Sands easily
- Paintable
- Solvent-Free
- Easy to use applicator in 8, 16 and 32 oz bottles
- Does not crack over time and does not expand contracts on the boards
-
Pre-catalyzed waterproof power adhesive for bonding wood.- Super-fast drying glue
- Especially for use in carpentry
- Only needs to be mixed with water and is ready for use
-
High performance wall covering adhesive for all wall covering types such as wallpapers, vinyl and fabric. Water clean up Aplicación manual. Interior Use.- Good glide for positioning
- Maximum strength Adhesion
- Water clean up
- Dries clear
- Mold and mildew resistant
-
Waterproof, high strength and fast setting polialiphatic resin glue ideal for exterior applications. Specifically formulated to bond hard and soft wood, as well as most porous materials.- Mildew resistant
- Excellent bond strength
- Exterior/Interior
- Dries rapidly- Short clamp time
- Sands easily
- Paintable
- Easy clean up
- Solvent-Free
- Easy applicator cap 32 oz
-
Universal wood glue is a high strength and fast setting aliphatic resin glue ideal for furniture, cabinetry and finish trim applications. Specifically formulated to bond hard and soft wood, as well as most porous materials. Aplicación manual.- Strong initial tack
- Dries rapidly- Short clamp time
- Solvent free
- Dries rapidly
- Short clamp time
- Multi-Purpose.
- Sands easily
- Paintable
- Easy clean up
- Non-flammable
- Wont soft
- Easy to use applicator for better handling 4, 8, 16 y 32 oz
-
Adhesive for bonding the cellophane windows of the envelopes, based on acrylic resins. Packaging available: 20 and 200 Kg
-
White acrylic filler specially formulated for seal and repair cracks, holes and dents on doors and windows. It is easy to extrude and produces a smooth and uniform bead. Adheres well to most common building materials.- Fills gaps, seals joints and repairs cracks
- For doors and windows
- Excellent bond strength
- Paintable
- Water clean up
- Does not crack
- Interior use
- Resistance to fungus and mold
- Available colors: White or black
-
Nitrocelluose based sanding sealer. Seals the wood in just one coat. After sanding, it provides a smooth surface ready to be top coated with CANO wood Lacquer.- Fast drying
- Easy to sand
- Dull finish