- Non-flammable
- transparent film
- Solvent-Free
- Excellent adhesion strength
- High tack
- Maximum bond strength will develop after 24 hours.
-
Adhesive with high initial grip and quick drying, based on aliphatic resins. Specially formulated to seal corrugated cardboard boxes used to pack bananas, as well as other porous materials. -
Aliphatic resins based adhesive. Used in bonding NCR carbonless paper spines. Does not contain solvents. Specially formulated for bonding collectors in continuous gluing machines in the graphic industry. Packaging available: 20 and 200 Kg -
Adhesivo para pegar los lomos de los libros a base de PVA. Packaging available: 20 and 200 Kg
-
Hotmelt Textbook Spine Gluing L2442 Packaging available: 20 Kg
-
Hotmelts Textbook Side Gluing L907 Packaging available: 15 Kg
-
Instant adhesive penetrating low viscosity for general use, designed to penetrate between preassembled components, recommended for bonding metal parts.
- A single component and contains no solvents.
- It has its adhesion in wet and dry locations.
- Excellent storage stability.
-
Oil color for painting wood, with a high covering power, good quality and price, based on Linseed oil. It is ideal for woodworking shops. All the colors can be intermixed between them- Excellent water control
- High level of pigmentation
- High covering power
- Compatible with most types of wood
- Proporciona excelente rendimiento, cobertura y terminación
- Ideal for wood work
- Available in Brown # 2, Brown # 3, Brown # 23 Chinese Red # 05, Blue Caribe # 30, Navy Blue # 21, Green Hope # 43, spearmint # 37, Orange Passion # 04, Yellow # 8, Black # 24 , Opaque White # 40 Different colors can be intermixed with each other.
-
High performance sealant based on acrylic polyurethane hybrid resins, especially designed for the manufacture of coatings for roofs and walls that increase repellency and water resistance and water-steam permeability.- High resistance to alkalinity
- Water ponding resistant
- Life warranty
- No Primer Required
- Fast drying
- Lower the interior temperature
- Water ponding resistant
- Lower the interior temperature / save energy
- Ceramic microsphere thermal barrier
-
The hottest blue PVC cement available which is specially formulated for residential and commercial irrigation to minimize cure times. For use on all schedule and classes of PVC pipe and fittings up to 6’’ with interference fit.- Ideal for pools, water tanks, and other humid places
- Very fast setting formula for wet conditions and / or immediate pressurization
- No primer needed
- Recommended application temperature 40°F to 110°F / 4°C to 43°C
- Fast drying
-
Oatey® Clear Cleaner is a simple and effective cleaner formulated for ABS, PVC and CPVC pipe and fittings that flows freely and evaporates quickly.- Recommended application temperature 40°F to 110°F / 4°C to 43°C
- Lo-V.O.C. Solvent Cement meets SCAQMD 1171/316A or BAAQMD Method 40 and various environmental requirements
- All schedules and all diameters
-
Medium density orange cement for use in CPVC pipe and fittings up to 6 "in diameter. Packages available: 4, 8, 16 and 32 fl oz with applicator and 1 gallon.- For C.T.S. tubing (the size of a copper tube) and C-80, potable pipes
- It can be applied at temperatures of 4.5° C to 38° C
- Orange color
-
-
Oatey® Purple Primer is an NSF-listed, aggressive primer for use on PVC and CPVC pipe and fittings.
- Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld
- • For use in areas where plumbing code calls for verification that a primer has been used
-
Oatey® Heavy Duty Gray PVC Cement is formulated for use on all schedules and classes PVC pipe and fitting up to 12" diameter with interference fit, up to 18" for non-pressure Recommended for potable water, pressure pipe, conduit and DWV- Thick formula fills gaps in large diameter pipe and loose fitting joints.
- Recommended application temperature 40°F to 110°F / 4°C to 43°C
-
Oatey® Regular Clear PVC Cement is formulated for use on all schedules and classes of PVC pipe and fittings up to 4" for Sch. 40 and up to 2" for Sch. 80.- Recommended for potable water, pressure pipe, conduit and DWV
- Meets ASTM D2564
- Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements
- Recommended application temperature 40°F to 110°F / 4°C to 43°C
-
High quality primer rust protector to be use on ferric surfaces. Available in a wide variety of colors. Semi dull finish. It can be use also as a paint for metallic surfaces.- Corrosion protection for ferrous surfaces
- Great performance
- Fast drying
- Good finish
- Available colors: Gray, red, black, blue or green
-
-
HEAVY DUTY 9" ROLLER FRAME
- ANTI-DROP 9” X 1/2' ACRYLIC ROLLER: TO PAINT ALL TYPES OF SMOOTH WALLS AND SURFACES-AC0013
- 9" X 3/4' POLYESTER ROLLER : TO APPLY WATER PAINT TP ALL TYPES OF SMOOTH AND SEMI ROUGH WALLS AND SURFACES-AC0014
- 9" X 1/4 " POLYESTER ROLLER 9”: TO APPLY WATER PAINTS TO ALL TYPES OF ROUGH AND SEMI ROUGH WALLS AND SURFACES-AC0039
- 9" X 1/4" INDUSTRIAL MOHAIR ROLLER FOR ENAMELS PAINTS-AC0041
- GREY HIGH QUALITY MIXED BRISTLES 2, 2.5 AND 3 INCHES
- EXTENSION POLES FOR ROLLER FRAME 3 m 2 parts
- HEAVY DUTY DEEP PLASTIC TRAYS FOR 9'' ROLLERS
ROLLER SLEEVES:
-
Oatey® Heavy Duty Gray PVC Cement is formulated for use on all schedules and classes PVC pipe and fitting up to 12" diameter with interference fit, up to 18" for non-pressure- Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements
- Meets ASTM D2564
- Recommended application temperature 40°F to 110°F / 4°C to 43°C
- Recommended for potable water, pressure pipe, conduit and DWV
- Thick formula fills gaps in large diameter pipe and loose fitting joints
-
Non-toxic adhesive, fast and transparent, washable, based on aliphatic resins. Ideal to bond cork, cardboard, paper, fabric and other porous materials.- Permanent adhesion
- High heat resistance
-
High strength and fast setting aliphatic resin glue ideal for furniture, cabinetry and finish trim applications. Specifically formulated to bond hard and soft wood, as well as most porous materials. Available in yellow and white colors- Good adhesion
- Sands easily
- Paintable
- Easy clean up
- Solvent-Free
- Applicator cap in 8, 16 and 32 oz and 5 gal
-
Silbond acrylic filler is a white filler specially formulated for seal and repair cracks, holes and dents on concrete, plaster and wood walls and roofs.- Fast drying
- Excellent bond strength
- Easy to sand
- Paintable
-
Concrete liquid pink adhesive specially formulated to promote a permanent strong bonding between old and new concrete, plaster, brick, stone, wood, plywood, ceramic and many other surfaces with structural integrity. It can be also incorporated direct to the concrete mix, using one gallon of water instead of one gallon of product to improve rheology and increase bonding strength.- Excellent bond strength
- Exterior / Interior
- Water clean up
- 45% Solids
-
Bonds quilt foam, leather, wood, decorative laminates, plastic laminates, Plywood, linoleum, etc.
An advanced brush grade chloroprene based formula, specially design for bonding a wide variety of upholstery materials used in furniture manufacturing.- High adhesion strength.
- Heat-resistant.
- Multi-Purpose.
- Multi-Purpose.
-
Black asphalt based compound specially designed to repair cracks and holes on concrete on roofs. Seals damaged parts and produce a waterproof film. Seals damaged parts and produce a waterproof film. It is recommended as a primer for very porous and irregular surfaces, adapting it to waterproofing.- Seals and repairs holes and cracks
- Fully waterproof
- Paintable
- Exterior use
- Yield: Approx. 12 square feet (1 m 2) / gallon
-
An advanced brush grade formula based on high crystallization polymers which offers permanent bonding and ultra fast setting, specially design for bonding a wide variety of substrates used in furniture manufacturing, mattresses and upholsteries.
- Bonds wood, decorative laminates, plywood, quilt foam, leather, rubber and similar surfaces
- Moderate heat resistance.
- Dry ultra-fast (10-20 minutes).
- Open time 40 minutes
-
Water based textured blue adhesive agent to bond old and new concrete to old concrete. It can be applied by brush or roller on the surface of masonry, plaster, concrete, brick, coral, wood, plywood, ceramic and many other surfaces with structural integrity.- Exterior / Interior
- Maximum strength Adhesion
- Water clean up
- 45% Solids
-
Silibond 101 White Glue Versatile product for a wide range of applications. Specially designed for paper, cork, cloth, wood and other porous materials. Ideal for photo mounting.- Permanent adhesion
- High heat resistance
- Dries quickly
-
Versatile product for a wide range of applications. Designed especially for gluing paper, cork, screen, wood and other porous materials. It is ideal for photo frame. It is ideal for photo frame. Dries quickly Easy Use. It contains no solvent. Non flammable.- Permanent adhesion
- High heat resistance
- Dries quickly
-
Multifunction medium viscosity long open time EVA Hotmelt. Translucent white color. Multifunction.
- Good fusion capacity to facilitate the application.
- Good penetration to substrate.
- Versatility to bond a variety of substrates.
- Open time for manually applications.
- Fast gluing.
-
Super-Bond is designed to be used on small offset presses as a low cost alternative to the more expensive rubber based inks. Tinta offset sustituto de Base – Goma con compatibilidad a una gran variedad de sustratos. Posee un excelente control del agua. It has an excellent dampening system. Super-bond will be kept “open” in the press all night; however will dry instantly with the help of any drier or catalyzer. Super-Bond for non porous substrates is a fast drying high quality oil based ink use in the printing of non porous materials such as PVC, cartonite, glossy substrates, etc. Available in all Pantone colors. Packaging available:- 0.5 Kg (1.1 Lb)
- 1 Kg (2.2 Lb)
- 4 Kg (8.8 Lb)
-
Superior is an excellent oil based press-ready litho ink. Can stay open on press overnight and will not skin in the can for days. Use Superiorwherever there is a commercial printing on paper substrates. It works well on a wide variety of stocks including quality offset stocks and coated stocks. It has a great deal of compatibility with many graphic arts chemicals. Ink conditioners and gel reducers will all work well with Superior Inks. It contains PE and PTFE waxes which means that with proper the precautions it can be used with or without overprinting. Superior Business Forms is a soy oil based ink used in continuous forms printing. Low VOC content. Colors are clean and bright, delivering quality results in such critical areas as the printing of delicate process shades and fleshtones. Excellent rub resistant only minutes after impression. Superior for non porous substrates is a fast drying high quality oil based ink use in the printing of non porous materials such as PVC, cartonite, glossy substrates, etc. Available in all Pantone colors. Packaging available: 0.5 Kg (1.1 Lb) 1 Kg (2.2 Lb) 4 Kg (8.8 Lb) -
Line of Aqueous based adhesives.Code Features and Applications 6305 Contact glue made of natural rubber. Use for the confection of the cover and the shoe in general. 6310 Glue made of synthetic latex. Used for pasting labels on corrugated boxes. 6315 Contact glue made of natural rubber with low content of ammonia. Use for pasting fabrics, leather, and other materials. -
An advanced brush grade chloroprene based formula specially designed for bonding a wide variety of substrates used in the shoe industry.Code Features and Applications 9105 Fast drying glue, good initial tack and medium open time. Suitable for gluing uppers to outsoles for later stitching. 9110 Glue (1K) with medium drying, strong grip and high heat resistance. Its good flexibility (medium crystallization) allows gluing of toe caps to leather. Used in gluing leather flooring, EVA, Neolite®. 9115 Glue (1K) with normal drying, good grip and high heat resistance. Suitable for application to the heel. Used in leather bonding, EVA, Neolite®. 9120 Glue (1K) with quick drying, strong grip. It has a high crystallization and is suitable for fixing floors to cut in sewing operations. 9125 Fast drying glue, strong grip and high heat resistance. It has a medium crystallization and is suitable for greasy leathers. 9130 Glue (1K) with medium drying, strong grip and high solids content. Its medium open time allows it to be used to manually join leather, EVA, Neolite®, wood, fabrics and other materials used in shoemaking. 9135 Quick drying glue, good heat resistance. It has a medium crystallization and a medium open time. Find its use in templates (internal part). 9140 Glue with permanent bonding and good heat resistance. It has a high crystallization and finds its use in the assembly of pieces of footwear to be later sewn. 9145 Fast drying glue with permanent bonding. Specially designed for gluing insoles and parts that will later be sewn. 9150 Glue with super-fast drying, high tack, permanent bonding and high resistance. It is especially suitable for leather and synthetic materials. 9151 Glue with fast drying, long open time and heat resistance. It is especially suitable for pieces that will later be sewn. 9152 Fast drying glue, long open time and good heat resistance. To be used in gluing substrates in the manufacture of footwear, especially in the manufacture of pieces that will later be sewn. 9155 Fast drying glue, good resistance to heat and without toluene in its “toluene free” formulation. It presents a medium crystallization and a medium open time, which allows it to be used in templates (internal part).